一种计算复合材料等效弹性性能的有限元方法

在最小二乘意义下提出了一种计算复合材料等效弹性性能的有限元方法.这种方法由于考虑了等效弹性张量各分量之间的耦合关系,所求得的等效弹性常数比传统方法更可靠,可适用于求解含任意形状的夹杂和夹杂物问题.通过算例计算了在不同弹性模量对比度下两相复合材料的等效弹性性能,并与相关的理论及数值结果进行了比较,结果表明,利用该方法计算含夹杂复合材料等效弹性常数是可行的.     

X型热膜探头的标定

本文研究了Ｘ型热膜探头的两种主要标定方法，有效角法和多速度偏航法，对两种方法使用时可能引入的误差进行了讨论，并对给定的同一流场用不同方法进行了计算。     

流动显示技术及其现代发展概况

本文回顾了流动显示发展的历史,以及它在流体力学研究中所起的作用。根据获取流动信息的方式不同,流动显示技术可分为两大类型。作为近代技术发展的例子,三维非对称流干涉图的定量计算、片光技术、散斑照相术、激光诱导萤光法、多普勒干涉图象显示速度场、光电信号转换激光干涉仪、以及图象处理和计算机产生数字流谱技术均作了简要的介绍。     

低速风洞微机控制闭环调速

本文提出一种用于调节低速风洞流速的测量及控制系统。该系统以微计算机为核心,不断采集风洞实验段的流速数据,并根据测量结果与指定值的比较去调节和控制风洞的电机转速,使风洞能准确地按指定风速运行或按予定的程序升速或降速,实现了低速风洞的闭环自动调速。本文给出了该系统的构成原理和性能实验结果。测试结果表明,本系统的超调量小于5％,稳态误差小于0.3％,调节时间小于50秒。     

无约束气云爆燃压力场的计算

利用球形流体力学方程和燃烧反应模型导出了无约束气云弱点火爆燃过程的压力分布场 ,编制了求解压力场的计算程序 ,可计算不同尺寸气云爆炸时各点的爆炸压力值。进行了可燃气云爆燃实验 ,对计算结果进行了考核。与实验结果相比 ,计算结果的偏差小于2 0 %。     

氮化铁磁性流体密封研究

利用磁性流体被磁场吸附的原理，探讨了氮化铁磁性流体密封装置的设计原理和动作过程，分析并通过试验验证了磁性流体密封承压能力，进而成功地研制了氮化铁磁性流体密封安全阀，基于磁性流体密封安全阀开启压力稳定性、可控性和密封性能测试结果，所研制的样机已正常运行10000h。     

单镜头三维粒子成像测速

本文提出了一种用单镜头进行三维流场测量的方法，建立了包括摄录系统、数字图象处理及识别系统及流动装置的３Ｄ－ＳＣＰＩＶ系统。完成了现有条件下的原理性定量测量实验。     

Comparative analysis of the main active components and hypoglycemic effects after the compatibility of Scutellariae Radix and Coptidis Rhizoma

In this study, a rapid and highly sensitive ultra high performance liquid chromatography with triple quadrupole mass spectrometry method with the mobile phase of acetonitrile and 0.1% aqueous formic acid was established and successfully applied to comparatively analyze main active components after their compatibility. Besides, the effects of Scutellariae Radix, Coptidis Rhizoma and combined extracts on type 2 diabetic rats induced by high‐fat diet along with low dose of streptozocin were investigated. Under the optimized chromatographic conditions, good separation of seven target components was achieved within 12 min. All calibration curves exhibited good linearity (R² ≥ 0.999). The relative standard deviation of precision, repeatability and stability varied from 0.69 to 2.23, 0.98 to 2.56, and 0.92 to 2.57%, respectively. The recovery ranged from 91.11 to 105.35%. The contents of seven active components were notably reduced after compatibility; however, the hypoglycemic effect of combined extracts was stronger than single drug by decreasing the activities of fructose‐1,6‐bisphosphatase, glucose 6‐phosphatase, phosphoenolpyruvate carboxykinase and increasing the activities of glucokinase, phosphofructokinase, pyruvate kinase. Accordingly, the established analytical method was accurate and sensitive enough for quantitative evaluation of seven investigated compounds. Moreover, the combined extract had definite effects on type 2 diabetes through multiple components against multiple targets.     

等离子体激励器的静特性与高速特性仿真研究

A parametric study of high-frequency plasma jet actuator was carried out, using the experiment- tally measured energy distribution law of arc discharge as an ideal heat source. The influence of the exit angle of the actuator on the flow field was explored. The jet flow field characteristics of the spark discharge actuator under supersonic flow (Ma0=2.0) were investigated. The results show that the energy density of heat flux increases and the jet front and forward shock wave moves faster with the decrease of discharge region, and the smaller the exit angle of the jet is, the stronger the momentum injection ability of the actuator along the flow direction is. The rule still applies under high-speed air flow conditions. Compared to the static condition, the momentum injection capability of the jet is stronger and the influence domain is larger under supersonic flow conditions.